Annual calibration and Prolaser 3 verification

Have your ProLaser 4 or ProLaser 3 laser speed gun calibrated annually as part of our dedicated monthly sessions.

We handle the collection of your device, its preparation before examination, its transport, the necessary tests, as well as its return to your department.

ProLaser calibration sessions are held around the 15th of each month, with the exception of August.

When to contact us?

We recommend contacting us approximately 2 months before your calibration anniversary date.

This lead time allows us to:

• prepare and send you a quote;
• receive your signed quote or official purchase order;
• reserve a spot during the desired calibration session;
• organize the transport of the ProLaser within the necessary timeframes;
• perform the checks and preparations before examination.

To participate in a session, your ProLaser 3 or ProLaser 4 must generally reach us during the last 10 days of the month preceding the session.

Example

For a session scheduled around June 15th, your device must reach us during the final days of May.

This organization allows us to carry out the necessary checks and preparations before the examination: sighting, alignment, general operation, and preliminary tests.

Calibration sessions

Sessions are generally organized around the 15th of each month.

Please note: no calibration session is organized in August.

To ensure a spot in the desired session, we recommend that you plan your request in advance.

Transporting the ProLaser

Once your service is scheduled, we will send you an email with the procedure for shipping your device.

You will be able to drop off the box containing your ProLaser carrying case at an official post office near you.

A Chronopost shipping label will be provided to you.

Around the 20th of the month preceding the session, we will provide you with, among other things:

• the Chronopost label;
• available post offices nearby;
• their opening hours;
• an "earliest" drop-off date;
• a "latest" drop-off date.

The drop-off period is generally organized over a window of about a week so that your device arrives within the necessary timeframes.

Information to provide

To prepare your file, please provide us with:

• the month of the desired session;
• the model: ProLaser 3 or ProLaser 4;
• the serial number of the device;
• the name of your institution, organization, city hall, municipal police, or company;
• the full return address;
• the contact person's first and last name;
• a mobile phone number or the service reception number.

The ProLaser serial number generally consists of 4 or 5 digits and is located under or on the back of the device.

Device preparation

Your ProLaser must be placed in its original shockproof carrying case.

The case must contain:

• the ProLaser;
• the batteries;
• the charger;
• the cigarette lighter adapter;
• the device accessories;
• the metrological logbook.

The complete carrying case must then be placed in a sturdy and properly protected box, ideally the original box.

Document to include

An identification sheet must be placed inside the carrying case with the following information:

• order number;
• ProLaser serial number;
• ProLaser 3 or ProLaser 4 model;
• month of the chosen session;
• contact name;
• full return address.

We will provide you with the necessary information so that this document can be printed and placed with the device.

After receipt

After receipt, your device is prepared for the scheduled session.

The various stages include pre-examination checks and tests, the examination, exit tests, and then preparing your device for return.

Your ProLaser is generally reshipped about a week after its calibration and exit tests.

Downtime duration

You should allow for an unavailability period of approximately 3 weeks between the collection of your device and its re-delivery.

Preparation and tests → Examination → Exit tests → Reshipment

We therefore recommend that departments using their speed gun daily plan the period during which the device can be out of service sufficiently in advance.

ProLaser 4 and ProLaser 3

This service is intended for the annual calibration of ProLaser 4 and ProLaser 3 laser speed guns.

When requesting a quote, simply indicate the device model, its serial number, and the month of the desired session.

Request a quote

Would you like to reserve an upcoming calibration session for your ProLaser 4 or ProLaser 3?

Use the "QUOTE" button and indicate your device model, its serial number, and the month desired for calibration.

Frequently asked questions

How often?

The procedure presented here concerns the annual calibration of ProLaser 3 and ProLaser 4. We recommend contacting us about two months in advance.

When do the sessions take place?

Sessions are generally organized around the 15th of each month, except in August.

How long is the device unavailable?

You should allow for about 3 weeks between the collection and re-delivery of the device.

When to send the ProLaser?

The device must generally reach us during the last 10 days of the month preceding the session.

How to send it?

We will send you a Chronopost label and the procedure for dropping off the package at an official post office near your facility.

What needs to be sent?

The ProLaser must be sent in its original shockproof carrying case, accompanied by its accessories, batteries, charger, cigarette lighter adapter, and its metrological logbook.